IIIT Kancheepuram Cutoff 2025: Complete Category-wise JEE Main Opening & Closing Ranks, JoSAA/CSAB Insight

IIIT Kancheepuram Cutoff 2025 published as opening and closing JEE Main ranks across All India categories; this guide breaks down branch-wise cutoffs, nine counselling rounds, category trends and practical counselling tips.

Edited by Vikram Mehta

    IIIT Kancheepuram Cutoff 2025: Complete Category-wise JEE Main Opening & Closing Ranks

    IIIT Kancheepuram Cutoff 2025 was published for admission to the BTech and Integrated BTech courses under the All India quota. The institute released cutoffs as opening and closing ranks across categories after a total of 9 seat allotment rounds (first 6 by JoSAA , last 3 by CSAB ).

    Quick summary: What this article covers

    • Key highlights from IIIT Kancheepuram Cutoff 2025: most and least competitive courses, and notable rank ranges.
    • How cutoffs are published (opening and closing ranks) and the counselling rounds that finalised seats.
    • Practical use: how to compare your JEE Main rank with branch-wise cutoffs and what to do during JoSAA/CSAB.

    How IIIT Kancheepuram cutoffs are determined (JEE Main + Counselling)

    Cutoffs at IIIT Kancheepuram are driven by JEE Main ranks and the seat allotment carried out through JoSAA and CSAB. Your final chance to get a seat depends on both your All India rank and the choices you lock during counselling.

    All published cutoffs in 2025 are under the All India (AI) quota and shown as opening and closing ranks. Opening rank shows the best-ranked candidate who got the seat that round; closing rank is the last candidate allotted that seat in the round. The gap between opening and closing ranks shows how wide competition was for that branch and category.

    Eligibility checklist (from published data):

    • You must have taken the JEE Main entrance examination.
    • You must participate in JoSAA/CSAB counselling for seat allotment.
    • Admissions reported here are for All India quota categories (General, OBC, SC, ST, EWS, PWD).

    IIIT Kancheepuram Cutoff 2025 — At-a-glance statistics

    • Total seat allotment rounds reported: 9 (first 6 JoSAA , last 3 CSAB ).
    • General AI category last-round closing ranks ranged between 20190 and 73115 ; round 1 range was 16711 to 43961 .
    • OBC AI last-round closing ranks ranged roughly 28116 to 89950 .
    • SC AI overall cutoff spread ran from 3413 to 210280 across rounds and branches.
    • ST AI round 1 closing ranks ranged 1805 to 3562 for competitive branches.
    • EWS AI notable closing rank: Engineering Physics closed at 105224 in the last round.
    • PWD AI had very low closing ranks in several branches; for example, CSE (AI) cutoff was 363 in both rounds reported.

    Important dates

    Event Date
    Article updated Apr 16, 2026
    Related: IIITDM Kancheepuram Admission 2026 article Mar 6, 2026
    Related: Placements 2025 article Feb 23, 2026

    IIIT Kancheepuram Cutoff 2025: Branch-wise cutoffs (Category-wise closing ranks)

    Below are the published round 1 and last-round closing ranks for each branch in the categories released. Use these to compare your JEE Main rank and estimate chances.

    General AI category (Round 1 vs Last round closing ranks)

    Course Round 1 (Closing Rank) Last Round (Closing Rank)
    B.Tech. in Computer Science and Engineering 16711 22123
    B.Tech. in Electronics and Communication Engineering 23099 29987
    B.Tech. in Mechanical Engineering 37105 53610
    B.Tech. + M.Tech. in Computer Science and Engineering 20607 28897
    B.Tech. ECE + M.Tech. (Communication Systems Design) 25266 34328
    B.Tech. in Smart Manufacturing 43961 67255
    B.Tech. in Computer Science and Engineering (Artificial Intelligence) 17950 20190
    B.Tech. in Mechanical + M.Tech. in AI and Robotics 33876 45791
    B.Tech. in Engineering Physics 32881 62441
    B.Tech. in Design Engineering 40225 73115
    B.Tech. ECE + M.Tech. Microelectronics and VLSI Systems 23466 24892

    OBC AI category (Round 1 vs Last round closing ranks)

    Course Round 1 (Closing Rank) Last Round (Closing Rank)
    B.Tech. in Computer Science and Engineering 6002 28116
    B.Tech. in Electronics and Communication Engineering 8028 38831
    B.Tech. in Mechanical Engineering 12492 71465
    B.Tech. + M.Tech. in Computer Science and Engineering 7427 36952
    B.Tech. ECE + M.Tech. (Communication Systems Design) 8559 39864
    B.Tech. in Smart Manufacturing 14676 89950
    B.Tech. in Computer Science and Engineering (Artificial Intelligence) 6150 28155
    B.Tech. in Mechanical + M.Tech. in AI and Robotics 11439 65258
    B.Tech. in Engineering Physics 11589 74328
    B.Tech. in Design Engineering 14681 86953
    B.Tech. ECE + M.Tech. Microelectronics and VLSI Systems 8726 36828

    SC AI category (Round 1 vs Last round closing ranks)

    Course Round 1 (Closing Rank) Last Round (Closing Rank)
    B.Tech. in Computer Science and Engineering 3413 91416
    B.Tech. in Electronics and Communication Engineering 5281 142610
    B.Tech. in Mechanical Engineering 6685 182877
    B.Tech. + M.Tech. in Computer Science and Engineering 4534 126148
    B.Tech. ECE + M.Tech. (Communication Systems Design) 5181 6222
    B.Tech. in Smart Manufacturing 8274 210280
    B.Tech. in Computer Science and Engineering (Artificial Intelligence) 3414 87748
    B.Tech. in Mechanical + M.Tech. in AI and Robotics 6229 158260
    B.Tech. in Engineering Physics 6991 187442
    B.Tech. in Design Engineering 7077 189615
    B.Tech. ECE + M.Tech. Microelectronics and VLSI Systems 4928 127449

    ST AI category (Round 1 vs Last round closing ranks)

    Course Round 1 (Closing Rank) Last Round (Closing Rank)
    B.Tech. in Computer Science and Engineering 1805 1828
    B.Tech. in Electronics and Communication Engineering 2282 226937
    B.Tech. in Mechanical Engineering 3039 256338
    B.Tech. + M.Tech. in Computer Science and Engineering 2143 2464
    B.Tech. ECE + M.Tech. (Communication Systems Design) 1875 256327
    B.Tech. in Smart Manufacturing 3409 304683
    B.Tech. in Computer Science and Engineering (Artificial Intelligence) 1874 2063
    B.Tech. in Mechanical + M.Tech. in AI and Robotics 3171 262237
    B.Tech. in Engineering Physics 3380 305934
    B.Tech. in Design Engineering 3562 369336
    B.Tech. ECE + M.Tech. Microelectronics and VLSI Systems 2337 248844

    EWS AI category (Round 1 vs Last round closing ranks)

    Course Round 1 (Closing Rank) Last Round (Closing Rank)
    B.Tech. in Computer Science and Engineering 2430 26274
    B.Tech. in Electronics and Communication Engineering 3907 38041
    B.Tech. in Mechanical Engineering 6553 78850
    B.Tech. + M.Tech. in Computer Science and Engineering 3371 35830
    B.Tech. ECE + M.Tech. (Communication Systems Design) 4475 40810
    B.Tech. in Smart Manufacturing 7290 88107
    B.Tech. in Computer Science and Engineering (Artificial Intelligence) 2860 26975
    B.Tech. in Mechanical + M.Tech. in AI and Robotics 5630 78107
    B.Tech. in Engineering Physics 6398 105224
    B.Tech. in Design Engineering 7442 104681
    B.Tech. ECE + M.Tech. Microelectronics and VLSI Systems 4429 33308

    PWD AI category (Round 1 vs Last round closing ranks)

    Course Round 1 (Closing Rank) Last Round (Closing Rank)
    B.Tech. in Computer Science and Engineering 458 458
    B.Tech. in Electronics and Communication Engineering 874 520057
    B.Tech. in Mechanical Engineering 1324 1324
    B.Tech. + M.Tech. in Computer Science and Engineering 688 688
    B.Tech. in Smart Manufacturing 1957 1957
    B.Tech. in Computer Science and Engineering (Artificial Intelligence) 363 363
    B.Tech. in Mechanical + M.Tech. in AI and Robotics 1581 783380
    B.Tech. in Design Engineering 2217 2217
    B.Tech. ECE + M.Tech. Microelectronics and VLSI Systems 1331 1371

    How to read these tables: opening/closing ranks show competition range. If your JEE Main rank is better (numerically lower) than the closing rank in your category for a branch, you were likely to be eligible for that seat in the final round.

    Category-wise highlights and what they mean for you

    • Most competitive branch overall: B.Tech. CSE (Artificial Intelligence) was the toughest in General AI with closing ranks as low as 20190 (last round). If you aim for CSE AI, expect heavy competition and prefer ranks well above the last-round closing rank.

    • Easiest General AI branch: Design Engineering had a last-round closing rank of 73115 . If your rank is in the 50–80k range (General), Design Engineering becomes realistic.

    • OBC AI showed wide movement: CSE opened around 6002 and closed at 28116 . That jump shows seat choices and float/freezing behaviour across rounds can dramatically shift cutoffs.

    • SC and ST categories show very wide spreads, with some branches closing at extremely large ranks in later CSAB rounds. For example, SC Smart Manufacturing closed at 210280 and ST Design Engineering closed at 369336 in final rounds.

    • PWD cutoffs are numerically low for top branches (e.g., CSE AI 363 ). If you are PWD, small-rank swings matter a lot — keep your options ready.

    Counselling rounds explained: JoSAA vs CSAB and strategy for each round

    The seat allotment for 2025 was completed in 9 rounds : first 6 rounds handled by JoSAA, last 3 by CSAB. JoSAA rounds usually set the initial pattern; CSAB rounds often see very large closing ranks for some categories as vacant seats are filled.

    Practical strategy for counselling:

    • Early rounds (JoSAA): chase higher-preference, high-competition branches only if your rank is comfortably within expected closing ranks. Else, keep a safety option.
    • Middle rounds: watch opening vs closing rank movement. If your rank is inside the opening-closing band for your preferred branch, consider floating to upgrade but ensure you have a backup.
    • CSAB rounds (last 3): these are for seats left after JoSAA. Many large jumps happen here. If you missed a seat earlier, CSAB can still give opportunities across engineering, integrated BTech and specialized branches like Smart Manufacturing.

    Common mistakes to avoid:

    • Freezing a seat without checking fee payment and document deadlines.
    • Not updating category/choice preferences when you become eligible under a different reservation rule.
    • Assuming round 1 is final — many students get seats in later JoSAA or CSAB rounds as cutoffs move.

    How to use these cutoffs to estimate your chances (rank-to-branch workflow)

    1. Find the last-round closing rank for your category and branch from the tables above.
    2. If your JEE Main rank is numerically lower than that closing rank, you had a realistic chance in the final round.
    3. If you are close to the closing rank (within a few thousand), prepare to participate in CSAB rounds and have alternate branches ready.
    4. For aspirational branches (CSE/CSE-AI), compare your rank against round 1 and last-round values; aim to be significantly better than the last-round closing rank to avoid relying on later luck.

    Category-specific adjustments:

    • OBC candidates should note that some OBC cutoffs widened drastically between rounds; being within round 1 closing rank gives a strong bargaining position.
    • SC/ST candidates can see very large final-round ranks—this means late-round seats may open up but check branch viability and location.
    • PWD candidates: small numerical differences can decide allotment. Keep documents ready and act quickly.

    If your rank is below last-round closing ranks:

    • Participate actively in CSAB rounds.
    • Consider alternate IIITs, NITs or state colleges where cutoffs are lower.
    • Keep backup plans like diploma lateral entry or private college options in mind.

    Missing data and how to fill the gaps (what’s not in the published cutoffs)

    Published cutoffs do not include:

    • Fee structure or annual tuition details.
    • Seat matrix or branch-wise seat counts.
    • Percentile-to-rank conversion guidance (JEE percentile mapping).
    • Trend comparison with 2024 or 2026 cutoffs beyond the 2025 tables.
    • Detailed reservation/domicile quota breakup or state quota rules.
    • Minimum eligibility marks or special domicile rules.

    How to get missing information:

    • Check the official institute website: https://www.iiitdm.ac.in/ for fee and official notices.
    • Email admission queries: academics@iiitdm.ac.in (general) or office@iiitdm.ac.in (admission related).
    • For seat matrix and counselling schedules, refer to the JoSAA and CSAB official portals and bulletins. Those documents list exact seat counts and reservation breakups per round.

    Suggested follow-ups for students:

    • Request the seat matrix and fees from the admissions office if you need exact branch seat counts.
    • Ask the office for any domicile or state quota clarifications if you expect eligibility under such rules.
    • Save official JoSAA/CSAB round-by-round PDFs — they show opening and closing ranks per round and are the primary record.

    Institute address and contacts from official publication:
    - Address: Melakottaiyur, Chennai 600127 (Off Vandalur-Kelambakkam Road), Kanchipuram, Tamil Nadu.
    - Website: https://www.iiitdm.ac.in/
    - Emails: academics@iiitdm.ac.in (general), office@iiitdm.ac.in (admission related).

    For JoSAA/CSAB seat matrices and counselling schedules, always verify on the official JoSAA and CSAB portals for the year you are applying.

    Final checklist and next steps for applicants

    If you have a JEE Main rank now:

    • Compare your rank with the last-round closing rank for your category and branch in the tables above.
    • Prepare scanned copies of essential documents (JEE Main scorecard, class 10 & 12 marksheets, category certificate if applicable).
    • Decide your choice order: keep safety, realistic and aspirational branches arranged logically.

    If your rank is below last-round closing ranks:

    • Register for CSAB rounds and apply to alternate IIITs or state colleges.
    • Consider branch flexibility — some engineering branches open more opportunities in placements or electives.
    • Keep checking the official institute website and the admission office emails for updates.

    Subscribe to official channels and check the JoSAA/CSAB bulletins regularly for any late changes or seat re-allotments.

    FAQs

    How are IIIT Kancheepuram BTech admissions determined?

    Admissions are based on JEE Main ranks and seat allotment through JoSAA and CSAB counselling rounds under the All India quota.

    How many counselling rounds were there in 2025?

    Seat allotment was conducted over 9 rounds : the first 6 by JoSAA and the final 3 by CSAB .

    What is the range for General AI last-round closing ranks and the most competitive branch?

    General AI last-round closing ranks ranged between 20190 and 73115 . The most competitive branch was B.Tech. CSE (Artificial Intelligence) with a last-round closing rank of 20190 .

    Which branch was the easiest to get into under General AI in 2025?

    In General AI, B.Tech. in Design Engineering was the most accessible with a last-round closing rank of 73115 .

    Where can I get official clarifications about fees and seat matrix?

    Check the institute website https://www.iiitdm.ac.in/ or email academics@iiitdm.ac.in and office@iiitdm.ac.in for fee and seat matrix queries.

    If my rank is close to the closing rank, should I wait for CSAB rounds?

    Yes. If you are close to the last-round closing rank, participating in the CSAB rounds is recommended because many cutoffs widen in later rounds.

    Are all cutoffs shown here under the All India quota?

    Yes. The published opening and closing ranks used here are for the All India (AI) quota categories.

    Do these cutoffs include state/domicile quotas?

    No. The tables and ranks reported are All India category cutoffs. For state/domicile-specific rules, check JoSAA/CSAB and institute bulletins.

    Quick next steps for you (one-line actions)

    • Compare your JEE Main rank to the last-round closing ranks in your category.
    • Prepare documents, email the admissions office for any missing data (fees/seat matrix).
    • Register and actively participate in JoSAA/CSAB rounds; keep safety options ready.

    (Official contact: Melakottaiyur, Chennai 600127; website: https://www.iiitdm.ac.in/; emails: academics@iiitdm.ac.in, office@iiitdm.ac.in)

    This post is for subscribers on the Free, Bronze and Gold tiers

    Already have an account? Log in